IP-E1010 5.25″ IP POE Ceiling Speaker

  • Description
  • Inquiry

* ABS flame retardant housing, iron mesh cover, one-way receiving terminal, digital decoding terminal and active smallpox horn in one;
* The equipment is designed with embedded computer technology and DSP audio processing technology.
* Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast) protocol;
* Built-in Class D 20W amplifier circuit, fine sound quality, strong power;
* 5.25 inch horn unit, full band coverage, clear sound quality bright and pleasant;
* When equipped with POE-powered POE switch, only one network cable is required to connect, the construction is simple and the cost is low;
* POE switch supply power up to 10W, if using ordinary switch, then the external DC12V power adapter power up to 20W;
* With a one-way linkage output interface (short-circuit signal), easy to extend with other systems;
* Support DHCP, compatible with routers, switches, bridge gateways, the Internet, multicast, unicast and other arbitrary network structures;
* Built-in network isolation lightning treatment circuit

Item NO.IP-E1010
Network interfaceStandard RJ45
Support agreementsRTP, UDP, TCP/IP, FTP
Audio formatMP3/WAV
Sample rate8K to 48KHz
Network transmission rate100Mbps
Audio mode16-bit stereo CD sound quality
The horn unit specification5.25″
Output frequency80Hz to 16KHz
Harmonic distortion≤1%
The signal-to-noise ratio≥80dB
Rated power10W (when POE is powered)
The ambient temperature-20°C to 70°C
Ambient humidity20% to 80% relative humidity
Power consumption24W
Input power supplyPOE/DC12V
Installation formCeiling type
MaterialABS flame retardant material
Cutout SizeDia175mm
The size of the productDia194 x 131mm