VTX Serial Active Dual Speaker Line Array System
- Description
- Inquiry
Model NO. | VTX208 | VTX208B |
Type | Active Dual 8″ two-way line array speaker | Active single 18″ linear sub-low array speaker |
Horn unit | LF 2*8″ ferrite / voice coil Φ51mm / magnetic steel Φ170mm HF 1*1.73″ ferrite / Voice Coil Φ44mm / Magnet Φ120mm | LF 1*18″ ferrite / voice coil Φ100mm / magnetic steel Φ220mm |
Rated impedance | LF 4Ω; HF 8Ω | 8 Ω |
Rated power (AES) | LF 350W / HF 100W | 800W |
Peak power (AES) | LF 1400W / HF 400W | 3200W |
Frequency response (-3db) | 55Hz-18KHz | 35Hz-200Hz |
Sensitivity (1m/1w) | LF 102dB; HF 112dB | 98dB |
Directivity (H * V) | 135° * 10° vertically adjustable | no directivity |
Maximum sound pressure level (1m/1w) | LF 128dB (continuous) / 136dB (peak) HF 132dB (continuous) / 139dB (peak) | 127db (continuous)/136dB (peak) |
Surface treatment | Black sand paint | Black sand paint |
Plate | 15mm multi-layer birch plywood | 18mm multi-layer birch plywood |
Overall dimension (w*d*h) | 620*420*250mm | 620*800*540mm |
Net weight | 18kg | 45kg |
Grid | Hexagonal mesh + inner covered sound-transmitting mesh cotton | |
Hanging | 4-point hanging, adjustable from 0° to 10° | 4-point hanging |
Module part | ||
Amplifier module | 2 channels | Single channel |
Output power | 750W/250W @ 8Ω | 1300W @ 8Ω |
Voltage requirements | 220V ~50Hz | |
Circuit type | Class D | |
Cooling method | Efficient fan cooling | |
Total harmonic distortion | ≤1% @1kHz, full power 8Ω | |
SNR | 100dB @20 Hz – 20kHz A-weighted @8Ω | |
Input sensitivity | 0.775V | |
Input impedance | 20KΩ | |
DSP | 48 kHz, 24-bit DSP processor, delay: 1.1 ms | |
Signal Processing | Speaker DSP Preset, Delay, EQ: HPF/LPF, Parametric EQ (Q, F, Gain), RMS Limiter, Peak Limiter, Invert, Mute, Input Gain | |
Control | RS-485/USB | |
Protection | Short circuit, thermal protection, overcurrent protection | |
AC power input/output | Neutrik PowerCon (Max: 15 A) (up to 6 in series) (220 V: 6 pcs) | |
Audio input/output | XLR 3-pin female line-level input |
Model NO. | VTX210 | VTX210B |
Type | Active Dual 10″ two-way line array speaker | Active single 18″ linear sub-low array speaker |
Horn unit | LF 2*10″ ferrite / voice coil Φ65mm / magnetic steel Φ170mm HF 1*1.73″ NdFeB compression tweeter / Voice Coil Φ44mm | LF 1*18″ ferrite / voice coil Φ100mm / magnetic steel Φ220mm |
Rated impedance | LF 4Ω; HF 4Ω | 8 Ω |
Rated power (AES) | LF 500W / HF 100W | 800W |
Peak power (AES) | LF 2000W / HF 400W | 3200W |
Frequency response (-3db) | 50Hz-18KHz | 35Hz-200Hz |
Sensitivity (1m/1w) | LF 90dB; HF 112dB | 98dB |
Directivity (H * V) | 135° * 10° vertically adjustable | no directivity |
Maximum sound pressure level (1m/1w) | LF 130dB (continuous) / 139dB (peak) HF 132dB (continuous) / 140dB (peak) | 127db (continuous)/136dB (peak) |
Surface treatment | Black sand paint | Black sand paint |
Plate | 15mm multi-layer birch plywood | 18mm multi-layer birch plywood |
Overall dimension (w*d*h) | 750*490*300mm | 750*800*540mm |
Net weight | 28kg | 50kg |
Grid | Hexagonal mesh + inner covered sound-transmitting mesh cotton | |
Hanging | 4-point hanging, adjustable from 0° to 10° | 4-point hanging |
Module part | ||
Amplifier module | 2 channels | Single channel |
Output power | 750W/250W @ 8Ω | 1300W @ 8Ω |
Voltage requirements | 220V ~50Hz | |
Circuit type | Class D | |
Cooling method | Efficient fan cooling | |
Total harmonic distortion | ≤1% @1kHz, full power 8Ω | |
SNR | 100dB @20 Hz – 20kHz A-weighted @8Ω | |
Input sensitivity | 0.775V | |
Input impedance | 20KΩ | |
DSP | 48 kHz, 24-bit DSP processor, delay: 1.1 ms | |
Signal Processing | Speaker DSP Preset, Delay, EQ: HPF/LPF, Parametric EQ (Q, F, Gain), RMS Limiter, Peak Limiter, Invert, Mute, Input Gain | |
Control | RS-485/USB | |
Protection | Short circuit, thermal protection, overcurrent protection | |
AC power input/output | Neutrik PowerCon (Max: 15 A) (up to 6 in series) (220 V: 6 pcs) | |
Audio input/output | XLR 3-pin female line-level input |