LCA-110 Active Dual Speaker Line Array System
- Description
- Inquiry
Model NO. | LCA-110 | LCA-110B |
Type | Passive single 10″ two-way line array speaker | Active single 18″ linear sub-bass array speakers |
Horn unit | LF 1*10″ NdFeB / voice coil Φ75mm / magnetic steel Φ170mm HF 1*1.73″ NdFeB compression tweeter / Voice Coil Φ44mm | LF 1*18″ ferrite / voice coil Φ100mm / magnetic steel Φ220mm |
Rated impedance | LF 8Ω; HF 8Ω | 8 Ω |
Rated power (AES) | LF 350W / HF 100W | 800W |
Peak power (AES) | LF 1400W / HF 400W | 3200W |
Frequency response (-3db) | 55Hz-18KHz | 40Hz-180Hz |
Sensitivity (1m/1w) | LF 98dB; HF 112dB | 99dB |
Directivity (H * V) | 120° * 10° vertically adjustable | no directivity |
Maximum sound pressure level (1m/1w) | LF 123dB (continuous )/ LF 136dB (peak) HF 132dB (continuous) / 142dB (peak) | 129dB (continuous) / 136dB (peak) |
Surface treatment | Black sand paint | Black sand paint |
Plate | 15mm multi-layer birch plywood | 18mm multi-layer birch plywood |
Overall dimension (w*d*h) | 500*320*310mm | 500*800*540mm |
Net weight | 20kg | 50kg |
Grid | Hexagonal mesh + inner covered sound-transmitting mesh cotton | |
Hanging | 4-point hanging, adjustable from 0° to 10° | 4-point hanging |
Connection method | Neutrik NL4 speaker stand LF 1+1- / HF 2+2- | |
Voltage requirements | 220V ~50Hz | |
Amplifier module | 3 channels | |
Circuit type | Class D | |
Cooling method | fan forced cooling | |
Output power | USB/900W;LF/400W;HF/200W @ 8Ω | |
Total harmonic distortion | ≤1% @1kHz, full power 8Ω | |
SNR | 100dB @20 Hz – 20kHz A-weighted @8Ω | |
Input sensitivity | 1V | |
Input impedance | 20KΩ | |
Working impedance | 8Ω | |
DSP functions | mute, polarity, gain, delay, limiter, mixer, EQ, XOver | |
DSP control | USB and RS-485 | |
Protection | Short, DCP, OVP, UVP, OCP, OTP | |
AC power input/output | powerCON NAC3MPA | |
Audio input | XLR male and female | |
Audio output | Neutrik NL4 speaker stand LF 1+1- / HF 2+2- |